This is a lubrication device used to remove the specified amount of grease at each full press.
On the thrust arm of the pump, grease is removed from the outlet of the pump under pressure. When pulling the handle, the suction hole of the cylinder is filled with grease. The spring pressure from the tracer plate applied on the top surface of the grease (filled in the reservoir) helps to push the grease into the suction hole.
The pump has its own chamber for storing oil. It has a transparent acrylic chamber. The oil can be poured into the tank by opening the top cap or from the filling nozzle provided near the body. The pump has a wall-mounted structure.
A non-return valve is placed in the system at the outlet port to control the return grease flow.
Output port size: 1/4 "BSP
Model : GP-15-6
Reservoir Capacity Kg : 1,5
The amount of grease printed in each stroke Gr : 6
Maximum Grease Pressure Bar : 150
Dimensions in mm : 165 x 140 x 365
Tankless Oil Hand Pump Model H-7
It is a simple pump made to give oil in the lubrication line.
It is ideal for general purpose machine, where the pump can be placed in the oil chamber of the machine or mounted separately in the machine case under the chamber.
The pump is operated by pulling the hand according to the lubrication requirement and releasing the arm.
To prevent damage to the piston of the pump, it is recommended to install a suction filter before the inlet of the pump. This filter is supplied as an optional accessory.
Safety valve is available as an optional accessory if required
Pressure : 15 Bar
Grease Quantity : 7 gr/ stroke
The most suitable connection is made with 6mm pipe.
Oil Hand Pump With Reservoir Model H-250-4
This pump has its own reservoir.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the handle is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
The pump has an internal control valve and pressure relief system.
The pump is also equipped with a safety valve that prevents overloading.
The pump is also equipped with an oil window to control the oil level in the pump and fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the tank.
Suitable mounting holes are available for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar
Grease Quantity : 4 gr/ stroke
Reservoir : 250 cc
Reservoir Material : Aluminum Casting
Oil Hand Pump With Reservoir Model H-250-4 A
This pump has its own reservoir made of ACRYLIC.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the arm is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
The pump has an internal control valve and pressure relief system.
The pump is also equipped with a safety valve that prevents overloading.
The acrylic body of the pump makes it easy to cross-check the oil level in the pump and fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the tank.
Suitable mounting holes are available for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar
Grease Quantity : 4 gr/ stroke
Reservoir : 250 cc
Reservoir Material : Acrylic
Oil Hand Pump With Reservoir Model H-600-6
This pump has its own reservoir.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the handle is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
The pump has an internal control valve and pressure relief system.
The pump is also equipped with a safety valve that prevents overloading.
The pump is also equipped with an oil window to control the oil level in the pump and fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the chamber.
Suitable mounting holes are provided for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar
Grease Quantity : 4 gr/ stroke
Reservoir : 250 cc
Reservoir Material : Aluminum Casting
Oil Hand Pump With Reservoir Model H-600-6 Plus
This pump has its own chamber made of Aluminum Casting, with mounting holes reflected from the side.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the arm is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
The pump has an internal control valve and pressure relief system.
The pump is also equipped with a safety valve that prevents overloading.
The pump is also equipped with an oil window to control the oil level in the pump and fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the tank.
Suitable mounting holes are provided for vertical pump mounting, which is projected outside the rear wall of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar
Grease Quantity : 6 gr/ stroke
Reservoir : 600 cc
Reservoir Material : Aluminum Casting
Oil Hand Pump With Reservoir Model H-600-6 A
This pump has its own reservoir made of ACRYLIC.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the handle is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
The pump has an internal control valve and pressure relief system.
The pump is also equipped with a safety valve that prevents overloading.
The acrylic body of the pump makes it easy to cross-check the oil level in the pump and to fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the tank.
Suitable mounting holes are available for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar - 20 Bar
Grease Quantity : 6 gr/ stroke
Reservoir : 600 cc
Reservoir Material : Acrylic
Oil Hand Pump With Reservoir Model H-1700-10
This pump has its own reservoir.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the handle is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
There is a check valve and pressure reducing system built into the pump.
The pump is also equipped with a safety valve that prevents overloading.
The pump is also equipped with an oil window to control the oil level in the pump and fill the reservoir through the upper opening when the oil level approaches the minimum point.
The pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the tank.
Suitable mounting holes are available for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
Pressure : 15 Bar
Grease Quantity : 10 gr/ stroke
Reservoir : 1700 cc
Reservoir Material : Aluminum Casting
Oil Hand Pump With Reservoir Model H-2000-10
This pump has its own reservoir.
It is the type of piston integrated with the handle of the pump, in which the piston is actuated by a cam.
When operating the lever, the pump drains the oil.
When the pulling force on the handle is released, the piston returns with the spring force and the pressure in the lubrication line is reduced to 1kg / sq.cm.
There is a check valve and pressure reducing system built into the pump.
The pump is also equipped with a safety valve that prevents overloading.
The total pump is made of S.S material, i.e. the body of the pump, while the rubber parts are vito, S.S.
Suitable mounting holes are available for vertical mounting of the pump.
The pump outlet is suitable for 6 mm diameter pipe.
The pump is suitable for water operation, among other chemicals.
Türkçe