The lubricant coming out of the pump is carried to the distributors with the help of the main line. Then the desired amount of lubricant is sent to the lubrication points. This process takes place when the pump is running or after the pump is running, depending on the dispensers selected.
Single line systems; It is designed for oil and 000-2 greases.
The systems are generally designed for small and medium sized equipment in the printing, textile, food industries and manufacturing locations.
It gives lubricant in the range of 0.01-2.5 cc per cycle for each bearing. Each bearing is lubricated in the right amount without being affected by viscosity and back pressure change with piston distributors. It provides easy and modular design with installation elements in small diameters.
Distributors Used in the System:
Distributors Used in the System
Possibility to take 0.01 to 0.60 cc oil for each oil separately from each outlet
Possibility to get 0.03 to 0.30 cc oil separately for liquid grease from each outlet
Replaceable nipples
Robust monoblock design
Distributors with 2,3-5 outputs
Easy assembly thanks to Quick connector
Ability to work with MKU and MKF model pumps
Tightening Type Distributors
Possibility to take 0.01 to 1.50 cc oil for each oil separately from each outlet
Possibility to get 0.03 to 0.30 cc oil separately for liquid grease from each outlet
Replaceable nipples
Robust monoblock design
Distributors with 2,3-5 outputs
Models that can be directly attached to the bed
Ability to work with MKU and MKF model pumps
Liquid Grease Series Distributors
Ability to give liquid grease in 0.10-0.40 cc / stroke intervals
Distributors with 2.4-6 outlets
Replaceable nipples
Robust monoblock design
Liquid Grease Series Distributors
Ability to give oil and grease in the range of 0 - 1,70 cc / stroke
Possibility to output oil up to 1 - 8 points
Replaceable nipples
Robust monoblock design
Possibility to work at 40-150 bar (oil), 70-300 bar (grease)
Operating range Oil > 40cSt - Maximum NLGI 2 grade in grease
Türkçe